7.5kw 8bar tank mounted all in one screw air compressor with air tank and air dryer permanent magnet vsd type
·Main motor: Permanent magnet motor IP23
·Control type: microprocessor
·Driven type: One shaft direct driven
·Cooling type: air cooling
·Residual oil content: less than 3 ppm (with one pcs line filter)
·Air dryer: refrigerant R410
·Delivery: 25 days
Technical parameters:
| Model. | Motor | noise | Oulet | pressure | flow rate | Weight | net weight | Dimensions | Cooling | Driven |
| Kw | Hp | Db(A) | Connection | bar | m3/min | Kg | Kg | LxWxH (mm) | Type | Type |
| compressor/tank(180L) | 5,5 | 7.5 | 73 | G3/4 | 8-10bar | 0.8m3/min@8bar 0.7m3/min@10bar | 440 | 340 | 1120*635*1370 | Air cooling | Direct |
| compressor/tank/dryer(220L) | 520 | 420 | 1900*635*1370 |
| compressor/tank(180L) | 7.5 | 10 | 73 | G3/4 | 8-10bar | 1.1m3/min@8bar 1.0m3/min@10bar | 460 | 360 | 1120*635*1370 | Air cooling | Direct |
| compressor/tank/dryer(220L) | 540 | 440 | 1900*635*1370 |
| compressor/tank(272L) | 11 | 15 | 75 | G3/4 | 8-10bar | 1.6m3/min@8bar 1.3m3/min@10bar | 590 | 490 | 1500*750*1735 | Air cooling | Direct |
| compressor/tank/dryer(340L) | 690 | 580 | 1900*750*1735 |
| compressor/tank(272L) | 15 | 20 | 75 | G3/4 | 8-10bar | 2.3m3/min@8bar 2.0m3/min@10bar | 610 | 510 | 1500*750*1735 | Air cooling | Direct |
| compressor/tank/dryer(340L) | 700 | 600 | 1900*750*1735 |
| compressor/tank/dryer(500L) | 18.5 | 25 | 75 | G1/2 | 8-10bar | 2.9m3/min@8bar 2.6m3/min@10bar | 920 | 1000 | 2050*1120*2050 | Air cooling | Direct |
| compressor/tank/dryer(340L) | 22 | 30 | 75 | G1/2 | 8-10bar | 3.5m3/min@8bar | 950 | 1050 | 2050*1120*2050 | Air cooling | Direct |
Controller display main functions:
1 Start Button:
- When compressor is at stop status, press this button to start the compressor.
- When compressor is set as master (No.1) in block mode, press this button to start the compressor and
activate block mode function at the same time.
2 Stop Button:
- When the compressor is at running status, press this button to stop the compressor.
- When compressor is set as master (No.1) in block mode, press this button to stop compressor and block
mode function as well.
3 Set Button; Load / unloading Button:
- When the compressor is at running status, press this button to load, unload.
- When the compressor is at setting mode, press this button after modification to confirm and save the
modified data.
4 Return button / Reset button:
- When modifying data, press this button to exist data setting mode.
- When viewing the menu, press this button to return to previous-menu.
- When the controller is at failure stop status, long press this button to reset.
5 Move left button:
- When modifying data in textbox, press this button to move the cursor to the left data.
- When cursor is in the page icon, press this button to move to the previous icon.
6 Move up button/Increasing button:
- When modifying data, press this button to increase the data at current position.
- When cursor is in the page icon, press this button to move to the next icon.
7 Move down button /Decreasing button:
- When modifying data, press this button to decrease the data at current position.
- When cursor is in the page icon, press this button to move to the next icon.
8 Move right button:
- When modifying data, press this button to move the cursor to the right data.
- When cursor is in the page icon, press this button to move to the next icon.
More photos of our compact screw air compressor: 
